Rated 5 Stars

Get Your OSHA Forklift
Training & Certification Online
In Under 1 Hour

Get the training OSHA requires, done today.

Sample certificate of completion and forklift operator wallet card.

$59 one time

Certificate, wallet card, Spanish and unlimited retakes included.

Get Certified

Employer Acceptance Guarantee

"I completed the certificate in around one hour with no issues at all. Highly recommended."
Scott M. · ✓ Verified buyer

Renewing a past certification? Get recertified
Buying for your team? See team pricing

What Operators Say

"The course was very clear and easy to follow. I completed the certificate in around one hour with no issues at all. Highly recommended."
Scott M. · ✓ Verified buyer
"Great course. Very informative and easy to complete. The unlimited quiz retries were very helpful."
Steven G. · ✓ Verified buyer

Get Your Online Forklift Certification In 3 Simple Steps

No classroom. No waiting. Start today.

  1. Smiling forklift operator in a hard hat and safety vest at the wheel in a warehouse

    Step 1: Enroll & Start Right Away

    Instant access on any phone, tablet, or computer.

  2. The Key Forklift Parts lesson from the course open on a laptop, with the lesson list on the left and a labeled forklift diagram

    Step 2: Complete the Training & Exam

    8 short lessons. Most finish in under 1 hour.

  3. Sample certificate of completion and wallet card in front of the hands-on evaluation checklist

    Step 3: Print Your Certificate & Wallet Card

    Plus the hands-on checklist your employer signs, the minute you pass.

Get Certified

Instant access · Under 1 hour · Money-back guarantee

Covers All 7 Forklift Classes

One certificate lists them all.

  • Class I · Electric rider forklifts
  • Class II · Reach trucks & order pickers
  • Class III · Pallet jacks & walkie stackers
  • Class IV · Gas, propane & diesel, cushion tires
  • Class V · Gas, propane & diesel, air tires
  • Class VI · Tow tractors
  • Class VII · Rough terrain forklifts & telehandlers
A sit-down forklift, an electric pallet jack, and a telehandler lifting a pallet of lumber

Accepted In All 50 States & Canada

If your employer doesn't accept it, or you're not happy, you get 100% of your money back.

Map of the United States with a green check mark

100% Online, On Any Device

Phone, tablet, or computer. Stop anytime and pick up right where you left off.

The course open on a laptop and a phone: the Key Forklift Parts and Most Common Types of Forklifts lessons

OSHA, ANSI & CSA Compliant

Built on the federal forklift rule and the US and Canadian forklift safety standards.

  • OSHA 29 CFR 1910.178

    The federal forklift operator rule

  • ANSI B56.1-2020

    US forklift safety standard

  • CSA B335-25

    Canadian forklift safety standard

Your Certificate The Minute You Pass

Download your certificate, wallet card, and hands-on checklist right after the exam. Every certificate has its own number your employer can check online in seconds. Valid for 3 years.

The hands-on evaluation checklist your employer uses for the practical part Sample certificate of completion and forklift operator wallet card, each with the operator's name, certificate number, and valid-through date

Forklift Operator Certification Course Overview

Tap any lesson to see what it covers.

  • 8 lessons
  • Quiz after every lesson
  • 30-question final exam
  • Unlimited free retakes
  • English & Spanish
1 Lesson 1: Introduction to Powered Industrial Trucks 5 topics · quiz
  • What Is a Powered Industrial Truck?
  • Safety Standards You Must Know
  • Responsibilities of Employers, Operators, and Trainers
  • The Certification and Evaluation Process
  • When Refresher Training Is Required
2 Lesson 2: Common Forklift Incidents 4 topics · quiz
  • Fatal Forklift Incidents - What Goes Wrong
  • How to Prevent Forklift Incidents
  • Forklift Incident Statistics
  • The Most Common Types of Forklift Accidents
3 Lesson 3: Types of Forklifts 4 topics · quiz
  • Most Common Types of Forklifts
  • Other Forklift Types
  • The Seven Forklift Classes
  • Forklift Types by Energy Source
4 Lesson 4: Components and Controls 6 topics · quiz
  • Key Forklift Parts
  • Attachments
  • Control Systems
  • Instrument Panel and Alerts
  • The Nameplate
  • Tires and Terrain
5 Lesson 5: Inspection Routines 4 topics · quiz
  • Daily Visual Pre-Operation Check
  • Daily Post-Start Check
  • Reporting and Documenting Defects
  • Periodic Inspections and Maintenance
6 Lesson 6: Load Handling and Stability 9 topics · quiz
  • Understanding the Center of Gravity
  • Understanding the Stability Triangle
  • How the Stability Triangle Works in Motion
  • Load Center and Rated Capacity
  • Proper Load Handling Techniques
  • Stacking and Unstacking
  • Traveling With a Load
  • Other Stability Considerations
  • Tip-Over Situations
7 Lesson 7: Forklift Operation 10 topics · quiz
  • Trailer and Railcar Loading Safety
  • Hazardous Locations and Enclosed Spaces
  • Driving a Forklift vs Driving an Automobile
  • Getting In and Getting Out
  • Starting the Truck
  • Navigating Tight Spaces, Aisles, and Pedestrian Areas
  • Common Site-Specific Hazards
  • Visibility and Blind Spots
  • Speed Control and Safe Turning
  • Parking and Shutdown Procedures
8 Lesson 8: Fueling, Charging, and Maintenance Safety 5 topics · quiz
  • Refueling Gas or Diesel Forklifts
  • Propane Tank Handling and Storage
  • Charging Electric Forklifts Safely
  • Battery Care and Required PPE
  • Basic Maintenance: What to Do, What to Report
Final exam: 30 questions Pass at 80%, free retakes. Your certificate is ready on the spot.
Get Certified

Instant access · Under 1 hour · Money-back guarantee

Frequently Asked Questions

Is online forklift certification legit and OSHA compliant?
Yes. Our course covers the formal instruction (classroom) part of the training OSHA requires under 29 CFR 1910.178(l). The other two parts, practical training and a hands-on evaluation, happen at your workplace: your employer provides them and documents the evaluation.
Will my employer accept this certification?
Our course meets OSHA's training standard, and every certificate carries a unique number. Your employer can check it in seconds on our certificate check page. And if they still won't accept it, we refund you in full.
Do I still need hands-on training?
Yes. OSHA requires both classroom-style training (which our course covers) and a hands-on practical evaluation at your workplace. The employer conducts and documents that evaluation.
Is this certification valid in all 50 states?
Yes. OSHA is a federal agency, so the training requirements under 29 CFR 1910.178 apply nationwide. Some states like California (Cal/OSHA) have additional requirements, but our course meets or exceeds both federal and state standards.
Can I get forklift certified without an employer?
You can complete the training half on your own. Take the course, pass the exam, and you have a certificate showing a future employer that you have done the formal instruction required by 29 CFR 1910.178(l)(2). The hands-on evaluation has to be done by an employer or a qualified trainer on a real truck, so certification is finished once you start a job. Many people take the course before applying so they can list it on their resume and skip the classroom step on day one.
How long does it take to get forklift certified?
Most people finish in under an hour. The course is self-paced, so you can take longer if you need to. You can also pause and come back later. Your progress is saved automatically.
Can I retake the exam if I don't pass?
Yes. You can retake the final exam as many times as you need at no extra charge. Most people pass on the first try, but if you don't, just review the material and try again.
How long is the forklift certification valid?
OSHA requires forklift operators to be re-evaluated every three years. Your certification is valid for three years from the date of completion. The valid-through date is printed on your certificate and wallet card.
Is the course available in Spanish?
Yes. The full course and exam are available in Spanish at no extra cost, and you can switch languages at any time. Your certificate and wallet card are issued in English, which is what US employers and inspectors read, and the certificate records that your training was delivered in Spanish. Prefer to read about it in Spanish? See our Spanish-language page at easyforkliftcertification.com/certificacion-de-montacargas/.
What is your refund policy?
Simple: if you're not satisfied, or your employer or state won't accept your certificate, email us and we'll refund you in full. Refunds are processed within 2 business days.

Still have a question? Email us at
hello@easyforkliftcertification.com

100% GUARANTEE SATISFACTION

100% Satisfaction Guarantee or Your Money Back

Not happy with the course, or your employer won't accept your certificate? Email us and we'll refund you in full.

Get Certified Today

Finish online in under 1 hour. Not accepted or not happy? 100% money back.

Get Certified

Instant access · Certificate the minute you pass